Hanhuang Metal Company

Nickel 201 Round Bar

Nickel 201 Round Bar

  • Product Details

Nickel 201 is a low carbon, commercially pure wrought alloy grade. Produced according to ASTM B160 specifications, these components can be processed by means of either hot-working, cold-working, or annealing. Along with the chemical composition and mechanical properties, the ASTM B160 UNS N02201 Rod must conform to the values of a tension test, chemical analysis, and hardness test.

We have been one of the largest and well-known suppliers to the steel industry. HANHUANG has long been committed to the development of alloys and other special steels. Innovation platforms such as the key Laboratory of Advanced Alloys, the National Laboratory of Physics and Chemistry, the Alloy Engineering and Technology Research Center, and the Railway Rolling stock Steel Structure Engineering and Technology Research Center have been established.

The properties of nickel 201 are similar to that of nickel 200. However, because the content of carbon is lower in the alloy ofNickel 201 Round Bar, it is not susceptible to embrittlement brought on by inter-granular carbon at elevated temperatures. The higher content of nickel in the alloy makes these components resistant to several chemicals including acids and alkalis, as well as to dry gases at ambient temperature. The significance of nickel in theNickel Alloy 201 Square baris also responsible for the material’s resistance to mineral acids. However, this is a property that is dependent on aspects such as the temperature, aeration, and concentration of the solution.

ConditionTensile(ksi).2% Yield(ksi)Elongation(%)Hardness(HRB)
Available Product Forms:pipe,tube,sheet,strip,plate,round bar,flat bar,forging stock,hexagon and wire
Rod and Bar:ASTM B 160; ASME SB 160, DIN 17752, ISO 9723, VdTÜV 345.Hot Finished60-8515-4555-3545-80

Cold Drawn/Annealied or Hot Finished/Annealed55-7515-3055-4045-70
Pipe and Tube:ASTM B 161; ASME SB161, ASTM B 163; ASME SB 163, ASTM B 725; ASME SB 725, ASTM B730; ASME SB 730, ASTM B 751; ASME SB 751, ASTM B775; ASME SB 775, ASTM B 829; ASME SB 829, DIN 17751, ISO 6207, BS 3074 (NA12), VdTÜV 345.Seamless Annealed55-7512-3060-4070max
Plate,Sheet&Strip:ASTM B 162/ ASME SB 162, DIN 17750, ISO 6208, BS 3072-3073 (NA12), SAE AMS 5553, VdTÜV 345.Hot-Rolled/Annealed55-8015-4060-4045-75
Fittings:ASTM B 366/ ASME SB 366
Forgings:ISO 9725, DIN 17754
Wire:DIN 17753, ISO 9724
Chemical CompositionNickel(Plus Cobalt):99.0 min.
Copper:0.25 max.
Iron:0.40 max.
Manganese:0.35 max.
Carbon: 0.15 max.
Silicon: 0.35 max.
Sulfur: 0.01 max.

We always adhere to the "customer benefit maximization" service purpose, create maximum value for customers. Warmly welcome customers at home and abroad to visit and consult, and sincerely look forward to working with you to create a better future

When alloying elements are added to steel, iron and carbon, the basic components of steel, interact with alloying elements. The purpose of steel alloying is to improve the microstructure and properties of steel by the interaction of alloying elements with iron and carbon and the influence on the phase diagram of iron and carbon and the heat treatment of steel.


    Cell Phone:+86 13270133639
    Address:118, Beihuan Road, Xishan Distrct, Wuxi,Jiangsu Province,China

    company weixin picture